| Shear Strength | 400-550 MPa |
|---|---|
| Elongation | 20-25 % |
| Impact Strength | 20-40 J |
| Thermal Conductivity | 45-55 W/m-K |
| Material | Alloy Steel |
| Tolerance | ±1% |
|---|---|
| Type | Round/square/rectangle |
| Application | Industry/Construction |
| Material | 310S, 309S, 316, 316L, 317L, 321, 304, 304L, 304H, 302, 301, 303, 201, 202, 410, 410S, 420, 430, 431, 440A, 904L, Etc. |
| Surface | 2B, BA, HL, 8K, No.4, Etc. |
| Surface | 2B, BA, HL, 8K, No.4, Etc. |
|---|---|
| Material | 310S, 309S, 316, 316L, 317L, 321, 304, 304L, 304H, 302, 301, 303, 201, 202, 410, 410S, 420, 430, 431, 440A, 904L, Etc. |
| Length | 1000-12000mm Or Customer Requirement |
| Application | Hypodermic Needle, Hose Clamp, Spiral Spring, Flexible Hose, Button Battery, Computer Fittings, Cell Phone Parts, Stamping Parts, Photo Etching, Electronics, Bathroom Decoration, Elevator Decoration, Hotel Decoration, Kitchen Equipment, Kitchen Sink, Etc. |
| Technique | Cold Rolled/Hot Rolled |
| Impact Strength | 20-40 J |
|---|---|
| Yield Strength | 390-540 MPa |
| Melting Point | 1400-1450 °C |
| Material | Alloy Steel |
| Fatigue Strength | 450-650 MPa |
| Type | Round/square/rectangle |
|---|---|
| Technique | Cold Rolled/Hot Rolled |
| Surface | 2B, BA, HL, 8K, No.4, Etc. |
| Tolerance | ±1% |
| Application | Hypodermic Needle, Hose Clamp, Spiral Spring, Flexible Hose, Button Battery, Computer Fittings, Cell Phone Parts, Stamping Parts, Photo Etching, Electronics, Bathroom Decoration, Elevator Decoration, Hotel Decoration, Kitchen Equipment, Kitchen Sink, Etc. |
| Technique | Cold Rolled/Hot Rolled |
|---|---|
| Standard | GB, JIS, DIN, EN, ASTM, AISI |
| Type | Round/square/rectangle |
| Tolerance | ±1% |
| Material | 310S, 309S, 316, 316L, 317L, 321, 304, 304L, 304H, 302, 301, 303, 201, 202, 410, 410S, 420, 430, 431, 440A, 904L, Etc. |
